40ft Bogie Suspension heavy duty ISO Flatbed Truck Semi Trailer
This Flat bed semi trailer is designed with bogie suspension for transporting a 40’ ISO container and two 20ft ISO Container and other cargos at bad road condition . It meets all D.O.T., A.A.R., ANSI, T.O.F.C., FMVSS, SAE and TTMA specifications.
- Description
- Additional information
Description
40ft Bogie Suspension heavy duty ISO Flatbed Truck Semi Trailer | |||
1. MODEL: | GET.9TJZP.BOGIE.2/40 | ||
This Flat bed semi trailer is designed with bogie suspension for transporting a 40’ ISO container and two 20ft ISO Container and other cargos at bad road condition . It meets all D.O.T., A.A.R., ANSI, T.O.F.C., FMVSS, SAE and TTMA specifications. | |||
2. GENERAL PARAMETERS | |||
Overall Length | 41 ft | 12,390 mm | |
Overall Width | 8 ft | 2,490 mm | |
Overall Height | 5 ft | 1,550 mm | |
Fifth Wheel Height | 4 ft | 1,200 mm | |
Kingpin Location | 4 ft | 1,150 mm | From the rear face of the front bolster |
Landing Gear Location | 8 ft | 2,420 mm | From the kingpin center |
Axle Spread | 5 ft | 1,550 mm | |
Tandem Location | 24 ft | 7,425 mm | From Kingpin to Front Suspension Hanger |
Tare Weight | 16,540 Ibm | 7,500. kg | |
Payload | 77,170 Ibm | 35,000. kg |
3. STEEL STRUCTURE AND COMPONENTS | |||
Trailer Main beam | Deep: 450 mm (17.7″) Auto-welt Main Beam With High strength low alloy steel with 350 MPa yield hot-rolled I-beam (Q345) | ||
Flatbed Trailer Floor | 1/8″ (3mm) Thickness ASTM A572 grade 50 Checked Steel Plate Options: 1/5″ ( 5mm) | ||
Kingpin Upper coupler | 1/4” pick up plate with JOST 2” diameter square type king pin per SAE standard | ||
Flatbed Front Bolster | ASTM A572 grade 50 steel U form channel with 7” wide x 6” high x 5/16 thick open section, 3/8” top plate | ||
Rear Bolster | ASTM A572 grade 50 steel U form channel with 7” wide x 7” high x 5/16 thick open section, 3/8” top plate | ||
Rear Bumper | 100x100mm (4” x 4” ) square tube step with taper “H” section vertical member | ||
Bar is welded to uprights and main beam. | |||
Twist lock | 4 Sets | 1×40 (20) feet Container only |
4.TRAILER CHASSIS RUNNING GEAR | |||
Landing gear | Jost Or CIMC Brand 28T two speed telescopic manual landing gear | ||
Crank handle is located on the driver’s side of the chassis. | |||
Trailer Suspension | 32T Grade Monoblock Bogie Suspension with axles 16T X 2 sets, | ||
Axles | 150mm (6″) Square axles with 13T/15T/16T/20T capacity, 10 HUB piloted hubs with outboard mounting cast steel drum (ABS Options) Option : Disc Type Manufacturer: FUWA ,Options: BPW,SAF | ||
Wheels | steel disc wheel, 10 holes ISO, ; Option: Aluminum alloy rim | ||
Tires | Tubeless Tires , 8.25R15,8.25R20,11.00R22.5,12.00R22.5,12.00R20,385/65R22.5,425/65R22.5 , Manufactuter: Double Coin, Triangle, Michelin, Firestone | ||
Brake System | Dual line pneumatic brake, SAE hose and connector, WABCO relay emergency valve, OPTIONS: ABS brake system | ||
T30/30 spring brake chambers, T30 brake chambers | |||
3/8” blue air tube for control and 3/8” red for supply, 40L air tanks | |||
Electrical | OPTRONICS 12-volt LED lighting with Phillips mold seal wiring harness, meet DOT and SAE standards. Receptacle::7 way socket SAE standard, China Wiring: Electric cable protected by PVC conduit on main frame | ||
Painting | Electrophoretic spraying, that is, water-based coating, can be dissociated into a water-soluble film-forming material which can form a film in water, and swims to the opposite electrode in a direct current electric field, and precipitates on the surface of the object to form a coating film | ||
MISC | GET standard marking, document holder, conspicuity tape, Steel or black rubber mud flaps | ||
Option | Hubodometer, PSI tire inflation system |
Additional information
Trailer Series | FlatBed Semi Trailer |
---|---|
Manufacturer Model | GET.9TJZP.BOGIE.2/40 |
Trailer Payload | 45T are available |
Dimension | 40ft ISO Container Trailer |
Applications | Container Logistics, Cargo Logistics |